My friend and I are trying to setup a LAN in SOCOM II using GIT 0.96 but we aren't able to stablish a game connection. SOCOM II is unable to see any game created. :?
I've attached some information from Network Probe 0.5 obtained in my LAN. I'm not a expert in networks so if you can help it would be apreciated. :)
If you need more information, please let me know.
TIA
- Code: Select all
Network Probe 0.5
=================
- We are behind a router for connecting to Internet.
- There is no 192.168.0.3 IP in my LAN neither 192.168.0.5 IP in his LAN.
- 'Packets in' and 'bytes in' are 0 in console adapters using protocol UDP:3658.
- Mac addresses and public IPs are masked.
HOSTS USING THIS PROTOCOL
host name |address |protocol |packets in|bytes in|packets out|bytes out|
-------------|-------------|-----------------|----------|--------|-----------|---------|
192.168.0.255|192.168.0.255|ether.IP.UDP.3658| 74| 5476| 0| 0|
His PS2 IP -> 192.168.0.3 |192.168.0.3 |ether.IP.UDP.3658| 0| 0| 24| 1776|
My PS2 IP --> 192.168.0.5 |192.168.0.5 |ether.IP.UDP.3658| 0| 0| 50| 3700|
PROTOCOLS USED BY THIS HOST
host name |address |protocol |packets in|bytes in|packets out|bytes out|
-------------|-------------|-----------------|----------|--------|-----------|---------|
192.168.0.3 |192.168.0.3 |ether.IP.UDP.3658| 0| 0| 27| 1998|
PROTOCOLS USED BY THIS HOST
host name |address |protocol |packets in|bytes in|packets out|bytes out|
-------------|-------------|-----------------|----------|--------|-----------|---------|
192.168.0.5 |192.168.0.5 |ether.ARP | 1| 42| 2| 120|
192.168.0.5 |192.168.0.5 |ether.IP.ICMP | 4| 352| 7| 604|
192.168.0.5 |192.168.0.5 |ether.IP.UDP.3658| 0| 0| 52| 3848|
NETWORK CARDS
mac address |ip address |host |vendor |
-----------------|---------------|---------|---------------------------------|
ff:ff:ff:ff:ff:ff|255.255.255.255|Broadcast|Broadcast |
His adapter -> A:A:AA:A:AA:AA |0.0.0.0 |unknown |Sony Computer Entertainment, Inc.|
My adapter --> B:B:BB:B:BB:BB |0.0.0.0 |unknown |Sony Computer Entertainment, Inc.|
mac address |ip address |packets in|bytes in|packets out|bytes out|
-----------------|---------------|---------|---------|-----------|---------|
ff:ff:ff:ff:ff:ff|255.255.255.255| 276| 27237| 0| 0|
His adapter -> A:A:AA:A:AA:AA |0.0.0.0 | 0| 0| 50| 3700|
My adapter --> B:B:BB:B:BB:BB |0.0.0.0 | 5| 394| 85| 6334|
mac address |broadcast packets|broadcast bytes|multicast packets|multicast bytes|
-----------------|-----------------|---------------|-----------------|---------------|
ff:ff:ff:ff:ff:ff| 0| 0| 0| 0|
His adapter -> A:A:AA:A:AA:AA | 50| 3700| 0| 0|
My adapter --> B:B:BB:B:BB:BB | 78| 5730| 0| 0|
PROTOCOLS
protocol name |protocol port |description |packets|bytes|
-----------------|--------------|-----------------------------------------------------|-------|-----|
ether.IP.ICMP |1.2048.1 |Internet Control Message [RFC792] | 3| 210|
ether.IP.UDP.3658|1.2048.17.3658|User Datagram [RFC768,JBP] port 3658| 3| 180|
ether.ARP |1.2054 |ARP | 2| 102|
NAT Setup in Router
===================
Port 213 forwarded to GIT computer
GIT v0.96 Setup
==============
WinPcap 3.0.1 (I've got the same result with 2.3 version)
Configuration Dialog Box
------------------------
Forward to what hosts?
XXX.XXX.XXX.XXX:213 (UDP - fastest!)
Forward which TCP/UDP ports?
3658
Advanced Configuration Dialog Box
---------------------------------
Look at frames on which device?
My network card
Look into which frame types?
Ethernet II
Forward which IPX packet types?
IPX (I know it's not necessary but it came checked)
Forward which IPv4 protocols?
UDP
Sample from FORWARDED.LOG
-------------------------
...
[DATE TIME] network: EthernetII IPv4 UDP to:192.168.0.255:3658 from:192.168.0.5:3658 'ok'
[DATE TIME] network: EthernetII IPv4 UDP to:192.168.0.255:3658 from:192.168.0.5:3658 'ok'
[DATE TIME] network: EthernetII IPv4 UDP to:192.168.0.255:3658 from:192.168.0.5:3658 'ok'
...
Sample from INCOMING.LOG
------------------------
...
[DATE TIME] XXX.XXX.XXX.XXX: EthernetII IPv4 UDP to:192.168.0.255:3658 from:192.168.0.3:3658 'ok'
[DATE TIME] XXX.XXX.XXX.XXX: EthernetII IPv4 UDP to:192.168.0.255:3658 from:192.168.0.3:3658 'ok'
[DATE TIME] XXX.XXX.XXX.XXX: EthernetII IPv4 UDP to:192.168.0.255:3658 from:192.168.0.3:3658 'ok'
...