GiT + Duke3D

Gamer's Internet Tunnel, formerly Gamer's IPX Tunnel

GiT + Duke3D

Postby CB0T » Sun Jan 18, 2004 5:26 pm

Hi! :D

I need some help to play Duke3D IPX using GiT:


1 Computer) DialUp Host IP: 67.8.223.90

Image


2 Computer) DialUp Client IP: 67.8.223.91

Image


Thanks. :D
CB0T
 
Posts: 3
Joined: Sun Jan 18, 2004 5:11 pm

Postby Ark » Sun Jan 18, 2004 9:43 pm

That looks fine so far. You may want to analyze the logs and find out what IPX socket Duke3D uses so you don't waste traffic forwarding netbios or other junk. Also check advanced config and make sure the proper frame types are being checked and that IPX is even being forwarded. You must of course be using the same IPX frame types on each side of your connection. Windows can set this to "Auto" or any of the 4 choices, but Auto means different things on different versions of windows. It is recommened to force 802.2 on each computer and only use 802.2 frames if possible, since that is the most standard. Also you must be careful to select your proper ethernet adapter in the advanced config since the default will be the first choice, which may not always be correct.
Ark
Site Admin
 
Posts: 2108
Joined: Sat Sep 13, 2003 4:21 pm

Postby CB0T » Tue Jan 20, 2004 1:20 am

Thanks! :D
CB0T
 
Posts: 3
Joined: Sun Jan 18, 2004 5:11 pm


Return to GIT

Who is online

Users browsing this forum: No registered users and 35 guests

cron