by Ark » Sun Jan 18, 2004 9:43 pm
That looks fine so far. You may want to analyze the logs and find out what IPX socket Duke3D uses so you don't waste traffic forwarding netbios or other junk. Also check advanced config and make sure the proper frame types are being checked and that IPX is even being forwarded. You must of course be using the same IPX frame types on each side of your connection. Windows can set this to "Auto" or any of the 4 choices, but Auto means different things on different versions of windows. It is recommened to force 802.2 on each computer and only use 802.2 frames if possible, since that is the most standard. Also you must be careful to select your proper ethernet adapter in the advanced config since the default will be the first choice, which may not always be correct.