Configurations for Counterstrike 1.5 Using GIT

Gamer's Internet Tunnel, formerly Gamer's IPX Tunnel

Configurations for Counterstrike 1.5 Using GIT

Postby MyDesTinY » Fri Aug 19, 2005 8:20 am

Hi Guys,

These are the configurations I thought would work for Counterstrike 1.5...

Host or IP: My friend's IP add
Port Number: 213
Using Method: UDP-fastest!

Forward which IP/sockets
0000-ffff: All sockets

Forward which TCP/UDP ports?
27015: Half Life

However, when we tried to create a game...my friend can't see the game I created and vice-versa.

Thank you.
MyDesTinY
 
Posts: 4
Joined: Thu Aug 18, 2005 8:09 am

Re: Configurations for Counterstrike 1.5 Using GIT

Postby _zer0byte » Fri Aug 19, 2005 6:45 pm

MyDesTinY wrote:Hi Guys,

These are the configurations I thought would work for Counterstrike 1.5...

Host or IP: My friend's IP add
Port Number: 213
Using Method: UDP-fastest!

Forward which IP/sockets
0000-ffff: All sockets

Forward which TCP/UDP ports?
27015: Half Life

However, when we tried to create a game...my friend can't see the game I created and vice-versa.

Thank you.


-May be your friend or you are behind a firewall or router...If you are behind the firewall...Just open the port, open for GIT & CS : 213 & 27015

-Have Your Friends enter your IP and add it to his/her GIT too?

My friend n I use these settings...

-Advanced Configuration-
Look Into Which Frames Types? : Ethernet II
Other Options : Forward ARP , Use Old Reforward Prevention Method for IPX/IPv4 frames

Forward Which IPX packet types : We check all the check box (why? coz these settings just our experiment, but don't worry it works...^__^) But maybe Just check the "IPX" is enough... try it..

Forward Which IPv4 protocols : UDP

IPv4 Forward Options : Also Match Source Port , Alter Source IP (for NAT)

-Configuration-
Is the same as yours settings

We can see the game that was created..
but our problem was we couldn't join the created game...If that happen to you just type "sv_lan 0" in the game console... "~" I haven't try this method but hope it works.
Hope this Help You Des ^^

N.B : If anyone know a better settings plz post here...coz these settings was founded from experiment....
sorry for bad english...
_zer0byte
 
Posts: 4
Joined: Tue Aug 16, 2005 5:52 am

Postby MyDesTinY » Sat Aug 20, 2005 8:37 am

Hey thanks for the reply! :D

Lemme try these settings and I'll tell ya if it works :D
MyDesTinY
 
Posts: 4
Joined: Thu Aug 18, 2005 8:09 am


Return to GIT

Who is online

Users browsing this forum: No registered users and 20 guests

cron