by Ark » Sat Feb 05, 2005 10:42 pm
If GIT works with port 214 TCP but not port 214 UDP, then the issue is with your router or firewalls on one or both sides not forwarding port 214 to your internal computer properly.
What TheCompGuru said is also correct. If you are trying to get all computers on each side on the same LAN, your setup will not work if you use the netmask of 255.255.255.0 on each side.
If you use 255.255.0.0 or even 255.255.254.0, it would work, because 192.168.1.x and 192.168.0.x could be on the same network with those subnet masks. If you are using 255.255.255.0, you must change one of the sides network prefix to match the others.